oxystigma oxyphillum, Fabaceae, Angiospermae (Hardwood)

Other names: Tola chinfuta, Nom sinedon, Kitola, Émola, M’babou, Lolagbola, Akwakwa, Tshibudimbu
Chatoyance was measured by the chatometry.com team using the PZC method. The statistics for this specific timber are hereby summarized to provide an evaluation of data robustness:
Number of sources for samples: 3
Number of individual trees analyzed: 3
Number of specimens: 8
Number of measurements: 24
Max PZC read (of all measurements): 23.6
Min PZC read (of all measurements): 16.0
Max PZC average on one log: 22.3
Min PZC average on one log: 17.8
PZC Average of all logs: 20.3
Species: oxystigma oxyphillum
Family: Fabaceae
Clade: Angiospermae
Description: Oxystigma oxyphyllum is a large tropical hardwood tree native to Southeast Asian rainforests, featuring simple, alternate leaves and valued primarily for its timber, often grouped with “Meranti” species.
Other Local Names: Tola chinfuta, Nom sinedon, Kitola, Émola, M’babou, Lolagbola, Akwakwa, Tshibudimbu
Reference Colour: Red brown
Texture: Coarse
Grain: Straight or interlocked
Interlocked Grain: Slight
Notes: Heartwood copper red brown with blackish veins. Blackish resin exudations.
Diameter: 70÷120cm
Density @12% MC: 640kg/m³
Janka Hardness: 870lbf
Crushing Strength @12%MC: 58MPa
Static Bending Strength @12%MC: 88MPa
Longitudinal Modulus of Elasticity E: 14.96GPa
Volumetric Shrinkage Coefficient: 0.45% per %
Total Tangential Shrinkage TS: 7.5%
Total Radial Shrinkage TS: 3.9%
T/R Anisotropy Ratio: 1.9-
Fibre Saturation Point: 28%
Thermal Conductivity: 0.22W/mk
Lower Heating Value: 19830KJ/Kg
Sapwood Thickness: 6÷10cm
Sapwood Demarcation: Clearly demarcated
Resistance to Decay: Class 3 – moderately durable
Resistance to Dry Wood Borers: Class D – durable (sapwood demarcated, risk limited to sapwood)
Resistance to Termites: Class M – moderately durable
Treatability: Class – 3-4 – poorly or not permeable
Use Class Covered by Natural Durability: Class 2 – inside or under cover (dampness possible) Notes. This species is listed in the NF EN 350 standard. TCHITOLA
Durability Notes: This species is listed in the NF EN 350 standard. TCHITOLA Cross sections of Oxystigma oxyphyllum
Log Buoyancy: Floats
Log Conservation: Moderate (treatment recommended)
Drying Rate: Normal
Drying Risk of Distortion: Slight risk
Drying Risk of Case Hardening: No known specific risk
Drying Risk of Checking: Slight risk
Blunting Effect: Normal
Machining Tool: Ordinary
Suitability for Peeling: Good
Suitability for Slicing: Good
Sawing Machining Notes: Resin tends to clog tools. Sawdust is an irritant.
Assembly Nailing Screwing: Good
Assembly Notes: Resin exudations: to be taken into account when gluing.
Additional Notes: Due to resin exudations, objects made out of Tchitola are often painted. When the, wood has little resin, it can be used as a substitute for Walnut
End Uses: Shingles, Interior joinery, Framing, Built-in furniture or mobile item, Formwork, House framing, Boxes and crates, Blockboard, Veneer for back or face of plywood, Fibre or particle boards, Veneer for interior of plywood, Sliced veneer, Glued Laminated, Exterior panelling, Exterior joinery
Source 1: Tropical Timber Atlas, Editions Quae, e-ISBN 978-2-7592-2770-9
Pictures – each from a different individual tree:



[Previous] —————— [Next]
Want to know more? Get Woodworker’s Guide to Chatoyance!


… and enjoy the read!